This is beta free software for devices based on Realtek RTL8650B & RTL8650B CPU.
Official documentation of Realtek RTL8650B SOC.
Beta-howto for Edimax BR-6214K/KP device.
Patches, bug discussion are welcome at Forum.
Download compiled firmware possible from ZigFisher page.
Run command for download last SVN: svn co http://midge.vlad.org.ua/svn/trunk/openwrt-midge/ .
Disclaimer: I am not native English speaker, sorry for my English
Copyright: 2008-2009 © ZFT Lab. <zftlab-at-gmail.com>
Vendor / Device | Feature | Status |
---|---|---|
Asus WL-566GM | ? | |
D-Link DI-524UP | ? | |
D-Link DI-604UP | ? | |
D-Link DI-624S | ? | |
D-Link DI-634M | ? | |
D-Link DIR-100 | ? | |
D-Link DIR-120 | 16M RAM, 4M Flash, USB | supported with new ZFT Lab. bootloader |
D-Link DIR-320 | 16M RAM, 4M Flash, USB, WiFi | supported with new ZFT Lab. bootloader |
Edimax BR-6214K | 16M RAM, 2M Flash | supported |
Edimax BR-6214KP | 16M RAM, 2M Flash, USB | supported |
Edimax IC-1500 | ? | |
Kyocera KR-1 | ? , USB | |
Linksys WRV-200 | ? | |
Linksys WRT-54GX | ? | |
Nethear KWGR-614 | ? | |
Netgear RP-614 | 16M RAM, 2M Flash | supported |
Netgear WPNT-834 | ? | |
Sitecom WL-173 | ? |
<color blue>Hardware hack D-Link routers: DIR-604UP / DIR-524UP / DIR-120 / DIR-320</color>
<color blue>Hardware hack Edimax routers: BR-6214K / BR-6214KP</color>
JTAG research:
CPU pin | GPIO destination | JTAG connect | ||
---|---|---|---|---|
41 | ||||
42 | ||||
43 | ||||
44 | ||||
45 | ||||
45 | ||||
47 | ||||
48 | ||||
68 | Power LED on Edimax | JTAG TMS | ||
69 | USB LED on Edimax | JTAG TCK | ||
79 | Reset button on Edimax/D-Link | — | ||
48 |